25#SACK ALAMO ALLEGRO CEMENT COAT
$77.80
LaHabra Allegro II Cement Coating (Alamo) is a cement-based pigmented coating for portland cement surfaces such as stucco, CMU and precast concrete.
Availability by Location
Choose one location to purchase from.
- Description
- Additional information
- FAQ
Description
Product Overview: LaHabra Allegro II Cement Coating (Alamo)
LaHabra Allegro II Cement Coating (Alamo) is a cement-based, pigmented coating formulated for application to portland cement substrates. It serves as a decorative and functional finish within the category of cement coatings and stucco finishing products, specifically designed for use on cementitious walls and ceilings.
LaHabra Allegro II Cement Coating (Alamo) Technical Specifications
- Composition: Binder base consists of portland cement, hydrated lime, and proprietary ingredients. The color is supplied as white or tinted to the desired color.
- Finish: Creates a flat, non-gloss surface that is water-vapor permeable.
- Packaging: Sold in 12 lb (5.4 kg) bags; compatible with a liquid pigment system for tinting.
- Coverage: Covers approximately 320–480 ft² (30–45 m²) per 12 lb bag when two coats are applied.
- Drying & Curing: Dries in approximately 1 hour depending on temperature, humidity, and substrate. Cures by drying, with complete curing achieved in 24 hours under normal conditions.
- Mixing: Combine powder with approximately 2.5 gallons of cool, clean potable water per 12 lb bag. For certain low-pressure spray methods, up to 3.5 gallons may be used (material must be strained prior to spraying).
- Sprayer Specifications (Textured Surfaces): Minimum Graco XR7 airless sprayer with 0.015–0.019″” tip (flow rate 0.31 GPM).
- Sprayer Specifications (Smooth Surfaces): Minimum Graco 390 airless sprayer with 0.012–0.015″” tip (flow rate 0.47 GPM). HVLP/conventional gun fluid tip guidance is also available from the manufacturer.
- Regulatory Information: VOC-Compliant when using specified non-VOC colorants.
- Storage: Store off the ground under cool, dry conditions.
Applications & Material Features
LaHabra Allegro II acts as a decorative and protective colored coating for portland cement-based walls and ceilings. It is compatible with a variety of substrates, including stucco, paint-grade stucco, concrete block (CMU), and precast concrete. Key features include pigmentable color options (factory color and custom tinting capability) and a curing process that relies on drying rather than moist curing. The product is designed for spray application and is intended to be applied in full-wall sections or continuous architectural breaks.
Additional information
| Weight | 25 lbs |
|---|
What is the primary composition of this product?
The binder base is portland cement, hydrated lime and proprietary ingredients; color is supplied as white or tinted to the desired color.
In what pack sizes or units is the product supplied?
Allegro II is supplied as a dry mix in 12 lb (5.4 kg) bags and is used with a separate liquid pigment system for tinting.
What coverage rate is specified for Allegro II?
Manufacturer guidance lists approximate coverage of 320–480 ft² (30–45 m²) per 12 lb bag when two coats are applied.
How should the product be stored prior to use?
Store under cool, dry conditions off the ground as specified by the manufacturer.
Are color or variant options documented?
The product is available in white or factory-tinted standard colors and may be custom tinted using the liquid pigment system as documented by the manufacturer.
