25# SACK FOG COAT P-174 DESERT BEIGE
$43.80
Pigmented bonding cement coating for portland-cement exterior surfaces. Spray-applied color coat in P-174 Desert Beige formulated for cementitious finishes.
Availability by Location
Choose one location to purchase from.
- Description
- Additional information
- FAQ
Description
Product Overview: Merlex Fogcoat P-174 Desert Beige
Merlex Fogcoat P-174 Desert Beige is a pigmented bonding cement coating designed for application over portland-cement-based exterior surfaces. Classified as an exterior stucco color coat, this product is formulated as a spray-applied finish that provides a factory-colored cementitious surface. The formulation contains portland cements, hydrated lime, lime-proof mineral pigments, and specific additives.
Technical Specifications
- Product Type: Pigmented bonding cement coating (powdered finish material).
- Color: Listed as color code P-174; fine powdered solid appearance.
- Packaging: 25 lb bag.
- Coverage: One 25 lb bag covers approximately 1,500 to 2,000 sq. ft.
- Application Method: Spray-applied.
- Substrates: Prepared portland-cement-based surfaces.
- Material Standards: Portland cement — Type I (ASTM C150); Hydrated lime — Federal Specification SS-L-351B Type F.
- Composition: Sand (crystalline silica) 50–65%; Portland cement 15–30%; Calcium hydroxide 10–20%; Magnesium hydroxide 1–5%; Clay 1–5%; Iron pigments 1–5%.
- Mixing Guidance: Add clean water to form a heavy paste (approx. 1 qt / 0.95 L water per 5 lb), then dilute to a milk-like consistency. Final consistency requires approximately 1/2 gal (1.9 L) water per 1 lb or 13–16 gal (12.3–15.2 L) per 25 lb bag.
Applications & Material Features
Typical uses for Merlex Fogcoat P-174 include exterior stucco finish applications and use over portland-cement-based substrates such as concrete block, precast concrete, and tilt-up walls. The product is formulated to integrate with and become part of the cementitious surface.
- Compatibility: Compatible with future stucco applications.
- Pigmentation: Pigmented with mineral oxide pigments.
- Preparation: formulated to mix with clean water for spray application.
- Constraints: Refer to manufacturer documentation for curing, application constraints, and limitations.
Additional information
| Weight | 25 lbs |
|---|
What is the primary composition of this product?
Manufacturer safety documentation lists primary components as: crystalline silica sand (50–65%), portland cement (15–30%), calcium hydroxide (10–20%), magnesium hydroxide (1–5%), clay (1–5%) and iron pigments (1–5%).
How is the product packaged and what are typical units/coverage?
The product is supplied in 25 lb bags; manufacturer-stated coverage for one 25 lb bag is approximately 1,500 to 2,000 square feet (coverage varies with application and substrate).
How should the material be stored prior to use?
Manufacturer safety documentation specifies storing in a cool, dry area and keeping the product dry until ready for use.
What does the color code P-174 indicate?
P-174 is the manufacturer’s color code within the standard color range. Color appearance can vary with finish type and application; obtain a physical sample to verify color before ordering.
What are typical applications for this Fogcoat product?
Manufacturer-listed typical applications include exterior stucco finishing and use over prepared portland-cement-based substrates such as concrete block, precast concrete and tilt-up walls.
